It also includes examples of earlier ceramics (Japanese, Art Nouveau, Art Déco, Bauhaus, etc.) to situate the works in the ceramic history from which they have been excluded.
During the post-war decades, in Germany, under the impetus of the BAUHAUS, many ceramic studios and factories produced an unprecedented range of 'modern' and 'contemporary' works, alongside more traditional ones; in a move which made modern, 'experimental' works affordable and their production economically viable.
[One problem with 'Art' ceramics, during the late 19th and early 20th centuries, was that even when serially produced, the high cost of production meant affordability to a minority. During the 1920s, CAB (Céramiques d'Art de Bordeaux) and many small 'ateliers' in Puisaye and elsewhere, aimed to produce works which were affordable to all. The resulting standardisation of production (to lower costs of production), however, led to uniformisation of forms and glazes. This process, however, can also be observed in the stereotypical studio pots that came out of the Leach revival; to this day].
THE MATERIALITY OF GLAZES:
From top to bottom: 1: Le Cyclope, Annecy; 2-3: Vallauris, unidentified workshops/factories.
To achieve economic viability, both studios and factories had to standardise production. This, inevitably, resulted in discrepancies in standards between items of the same batch.
It should be noted that what we may regard, today, as the more artistically ambitious works, may not have been more expensive than the more conventional designs; produced by manufacturers to supply goods that the public wanted.
What is clear is that the enlightened design policy of certain manufacturers made 'Modernity' affordable to a section of the public that wanted it; it does not mean, however, that this Modernity spread into every home, as the Bauhaus had willed.
Finding quality in a sea of Mediocrity
Looking statistically at the mass of ceramics produced during that period (and today offered for sale on ebay), one can only conclude that quality pieces represent the tip of the iceberg in a sea of commercial mediocrity.
The same can be said of works produced in Vallauris, during the same period, where a standard streaky glaze was used by different manufacturers — either on on traditional or on 'free form items — to replace the traditional 'terres vernissés' pots. These came to and continues to symbolize Vallauris ceramics in the public mind, at car boot sales, brocantes, etc.
A cursory statistical examination of German works offered for sale in the UK and in France, not just on ebay but in second-hand and antiques shops, suggests that the best pieces of WGP and Vallauris were not exported to those countries.
ENGLAND: An Industry Plagued by Aesthetic Conservatism
In Britain, the ceramic industry's demise resulted from the incapacity of the larger firms to renew themselves, and by the inexorable influx of cheap products from Portugal,Turkey, then the Far East, which provided cheap non-descript ceramics.
Before that, the 'studio' ceramics revival led by Bernard Leach, claimed the field of 'art' ceramics for itself; rejecting 'industrial' ceramics and experiments with color glazes as a corruption of 'true' ceramics.
The limited range of 20th century British factory-produced ceramics showcased in the V & A suggests that production by the largest firms consisted predominantly of more or less conventionally decorated table ware (with 'Festival of Britain' type decoration); and that the vase may not have held the same iconic status as on the continent. Poole Pottery were probably the more consistent producers of modern ceramic designs in post-war Britain alongside smaller potteries dotted around the country: Cinque Port, Troika (1963-83), Tremaen Pottery (1965-88), etc.
An interesting experiment was conducted briefly at the Langley factory (Nottinghamshire), around 1931 [when Charles A.M. Oakes was appointed managing director and introduced a modern tunnel kiln], and art graduates were invited to produce new designs, on a part-time basis. The results (intriguingly not featured in the Langley monograph by John and Jennifer Giblin) stand out among the production of the company. Hand-thrown vases of modernistic forms, decorated with modern glazes (with some amitious attempts at crystallisation) give us a glimpse of an isolated and short-lived attempt at introducing ceramic modernity among an otherwise stylistically conventional range.
Craft in Industry
Ninety years on, it is urgent to situate those popular experiments from France and Germany in 20th century ceramic history, and challenge the arbitrary divide between CRAFT and INDUSTRY, inherited from William Morris, Ruskin and the Arts & Craft Movement; and later reiterated by Bernard each, against Herbert Read's suggestions in Art and Industry (1931) that 'archaic' crafts modes of production, of the type promoted by Leach, were now obsolete for ceramics, and should give way to industrial production.
In Germany, the BAUHAUS inspired many studios and factories to develop economically viable and sustainable, hybrids modes of production, which combined craft and design skills with new technologies and industrial or semi-industrial modes of production.
These new, hybrid modes of production generated new aesthetic materialities and values; some distinct from, others akin to those of studio works.
In the best cases — when craft skills were integrated in the production process (i.e. were allowed to manifest themselves, alongside design) — they gave factory-made ceramics an experimental look traditionally associated with studio works.
The pairing of a FORM and a GLAZE designer, complemented by a highly skilled work force, ensured that serially produced works had or approached the quality of studio works.
Unlike the 'royal' or aristocratic bone china pastiches tea, coffee and dinner sets produced in Britain, or the Festival of Britain-inspired illustrative 'modern' equivalent, firms like KPM, Furstenberg, Sgrafo, Arzberg and others, in Germany — alongside their 'traditional', neo-classical range — went on producing porcelain works which expressed the 20th century.
QUALITY IN MATERIALITY
The exhibition focuses on CERAMIC MATERIALITY and highlights COOPERATIVE forms of AUTHORSHIP (not on stars and celebrities working with archaic 'studio' modes of production, for an exclusive group of collectors).
Recent changes in attributions — from Roth to Marei Keramik — invite us to take a closer look at the objects themselves: at their 'aesthetic materiality'; rather than merely rely on signatures and fashions to shape our perception and appreciation/evaluation of the works.
Whether a vase was made by Roth or Marei is not important in itself. Appreciating the discrete qualities of a work (and the coherence of a body of works) — what makes it different from others — is. Equally important is the capacity to recognize inferior works for what they are, and to do so knowingly, on the basis of objective criteria.
The uncertainties in securing attributions highlights the wisdom of accepting to live (at least for a while) with a history of ceramics without names — and an imprecise chronology — focusing on the language of forms and glazes and on the making/production processes.
This new MAPPING OUT of the field will encourage us to discover new relations between the works; based on our individual perceptions and on personal reflections, rather than on the uncritical acceptance of conventional values, passing fashions, and arbitrary aesthetic hierarchies.
From the experience of 'closer looking', new aesthetic relations will emerge: first, within and between the works in the exhibition; next, between works in the exhibition and those in the permanent collection in Aberystwyth (displayed in the adjacent rooms) and others: in our homes, our personal collections, in public galleries, museums…
New qualities will become apparent, as we identify relevant criteria and begin a critical re-evaluation of the works.
|Basket (left). Hans Körting, Vase (Germany, 1960s)|
Unlike with the basket, where the weaving method generated simultaneously both the pattern and the structure [the pattern is the structure] — and any irregularities in the pattern (i.e. any deviations from geometric perfection) arose from human variations in the execution (i.e. from human limitations) — the more complex pattern on the vase was deliberately planned and carried out for decorative purposes only.
In the vase, some irregularities do occur, however — subtle and almost imperceptible — in the micro variations between each of the maker's marks: through the dizzying repetition of pressing the tool, cutting and removing bits of clay: to create as regular and as complex a pattern as could be achieved by human hands; leaving the distinctive mark of the potter's 'hand-writing'.
Taking a considerable amount of time and care — more than was necessary (but who is to say what is necessary in this case, without running the risk of imposing dogmas, such as 'Ornament is crime' ?) — and applying a high level of art (in the design) and craft skills (in the execution), in order to produce a richer and more complex pattern, highlights one feature of the 'aesthetic' dimension.
A 'snake' basket from South Asia:
shows that a decorative pattern was added to the structural weave of the basket, unlike in the Chinese bamboo charcoal basket ('Sumikago') used in Japan for the tea ceremony, decoration coincides with (and is not separated from) structure…
|Chinese bamboo basket ('Sumikago')|
|Bernard Leach . Hutschenreuther|
|Michael Cardew (c.1933) . 'Made in Italy' (1950s)|
Transcending dualisms, this provocative (iconoclastic to some) encounter suggests that both can be appreciated for their respective qualities; provided that we open our minds to the 'worlds' of the 'works' (in the spirit of philosopher Paul Ricoeur).
This requires extending the criteria we use for evaluating ceramics.
|Left: Martin Brothers (c.1900). Right: Kreutz Keramik (1970s)|
The gourd originally and still used, in some countries as a container for liquid or powdered substances, inspired ceramic forms in China, Korea and Japan; then, by imitation, 1000 years or so later, in Europe. Around 1900 the Martin brothers produced some distinctive small vases inspired by gourde shapes, which they decorated with scarifications and light glazes.
IN SEARCH OF CERAMIC HISTORIES…The exhibition challenges current accounts of 20th century Ceramic History, and their emphasis on exclusive studio ceramics (premissed on individual 'self-' [as opposed to 'collective'] artistic expression and authorship, and on the elitist segregation and classification of ceramics according to their alleged importance and significance in the 20th century) and proposes a more inclusive perspective, and an extension of the ceramic field on more democratic principles.
This 'extended' field brings together studio, industrial and other popular (non elitist) ceramic practices, which set out to relay the spirit of modernity to a wider public. These practices chose the 'commercial' route [which enabled a significant number of artists, designers, craftsmen and women to earn a living] over the 'elitist' path, which led to the production of rarefied, fetishized commodities, with their aesthetic value and cultural significance indexed on high auction prices.
The exhibition suggests that there are other ways of measuring value and significance, based on wider sets of criteria.
Looking back at the course of ceramic history (focusing on what was actually produced, at every level) will enable us to extend these values and propose an expanded account of ceramic history by visual means; letting the object write their history…
COLOR IN CERAMICS: DALPAYRAT AND THE STONEWARE REVIVAL
During the last quarter of the 19th century European ceramicists strove to rediscover the lost formulae of classical Chinese 'sang de boeuf' glazes.
Once the secret was rediscovered, more ambitious ceramicists, like Dalpayrat, set themselves the challenge of producing more complex reactions from copper oxide, to combine more complex colors and thick textures, which an early commentator compared to a 'flow of burning lava' [quoted by Horst Makus (1998):25].
Given the lack of systematic knowledge about the chemistry of glazes at that time, extensive research and experiments had to be conducted at industrial or research plants (like the laboratory of the Manufacture de Sèvres, in France), that had the facilities, technology, staff and financial resources to fund them.
This is why individual artists-ceramicists like Dalpayrat had to find industrial partners, to develop their work, and produce, in return, ceramics suitable for serial production, in factory conditions, in order to make the investment in research economically viable.
In these conditions, as can be seen in the works illustrated in Horst Makus' monograph on Dalpayrat ((See Horst Makust, Adrien Dalpayrat, Céramique Française de l'Art Nouveau, Stuttgard, Arnoldsche, 1998), the artist's main body of works consisted mostly of serially produced objects, that were necessarily less free and experimental [the processes having to be controlled in order to be reproducible] than if they had been individually produced as 'one offs', in a studio, exploiting 'accidents' and the 'gift of chance'; rather than trying to produce works in series.
Given the technological means and resources required, total experimentation (for simple economic reasons) was simply not compatible with working as an isolated, unassisted studio potter.
Artists who, like Jean Carriès, did — away from urban centers, in Puisaye — had to forego the complex glaze chemistry that led to bright colors and explore other properties of glazes.
The stoneware potters of Puisaye were subjected to and assumed the same constraints.
In La Borne, Vassil Ivanoff's pursuit of flambé reds produced wild/'fauves' earthy reds, unlike the bright, polished glazes achieved at Sèvres.
In Dalpayrat's case, his most experimental works can be found in the few test and trial pieces and from the few one-off items he produced as part of his research; like the two vases included in the exhibition, which do not appear to have been serially produced, but created as experiments to instigate color differentiation (red and blue) from copper oxide:
These two experimental works from the early to mid 1890s, show the visual transmutations of copper oxide in the presence of chemical catalysts, in a reductive atmosphere, in a transitional stage, from red to blue.
Let's note that for his serially produced works, Dalpayrat and his team had to settle for more easily controllable and reproducible effects, achieved by less aleatoric processes. These may have remained unequaled to this day, but have set standards for future experiments with glazes [See the works and writings of Jean Girel]
However, whereas Dalpayrat produced work for the luxury market, in Vallauris, Annecy and Germany, over half a century later, studios, industrial or semi-industrial plants set out to produce modern ceramics for a wider public, at affordable prices.
The Bauhaus had a significant impact on ceramics, by encouraging students to develop designs suitable for mass production.
This ethos stood at the opposite end of the fundamentally elitist (even if unintentionally so) contemporary ceramic revival instigated in Britain by Bernard Leach; which turned its back on industry and chose the model of the country potter of previous centuries as its mode of production, and 12th century Korean and 14th century Chinese works as its exemplars.
Unfortunately, this contrived philosophy did not benefit the majority or deliver its promise (good pots for all). On the one hand, it inspired a mass of cloned, formulaic, and anachronistic hand-thrown pots which shared the same dullness as some of the industrially mass-produced works. On the other, it produced fetishized commodities imbued with the aura of the maker/master (which conferred upon him/her high symbolic value at the expense of their function as bowls, picher, cider flagond, etc.). Only affordable to a few, they betrayed the spirit of the originals [as can be verified by reading Soetsu Yanagi's book The Unknown Craftsman which inspired the revival].
In spite of its archaic-elitist nature and its shortcomings, the model persists in craft ceramics.
|Modernity as the reinterpretation of Tradition|
The Halle vase (above, centre), designed in 1931 by Bauhaus student turned teacher Marguerite Friedlaender-Vildehain, reinterprets the neo-classical porcelain vase of Carl-Friedrich Schinkel, by stretching it upward; reducing the lip to a minimum and increasing the height of the foot. This simple structural intervention confers upon the vase a vertical dynamism.
By contrast the vase designed in 1937, by Walter Nietzsche for Furstenberg (above right), more conventionally emphasises the body of the vase; giving it an overall sense of stability and weight.
|Johannes Leßmann, Krug Vase. Hand-thrown earthenware. (1930s)|
|Walter Gebauer. Two Vases. Hand-thrown stoneware (1937, 1953)|
In the green vase, the formal components have been reduced from four to two: foot and body. The neck and lip have been absorbed in the organic body of the vase.
This new synthesis of the vase (different from the more emphatically articulated geometric Halle vase) was adopted by many studio potters and ateliers throughout the 50s: Hermann Grothe, Walburga Külz, Theodor Bogler, Ursula Fesca, F. Glatzle, Rudi Stahl, Paul Eydner, etc. to name a few, and became a distinctive feature of the period, alongside (and probably in response to) the introduction of streamlining from the USA.
It is also apparent in Ceramano's unusual but later 'Rio' vase…
This trend can be observed, in two works from the same workshop at Margarethenhöhe Keramische Werkstatt, in the shift from the constructed Bauhaus jug by Lehmann to a more fluid, organic form by Külz, reminiscent of ancient pots from the East:
Margarethenhöhe Keramische Werksatt: Johannes Leßmann, 1930s (left). Walburga Külz, early 50s (right).
During the 50s, Bauhaus teacher Theodor Bogler, combined refined forms with pure color and subtly textured glazes to produce vases of arresting beauty and simplicity. The example illustrated below, for the Maria Laach Abbey ceramic workshop, encapsulates the Bauhaus ethos, with an added note of spirituality. The pitted surface of the glaze recalls, in its texture, the white glazes used by Lucie Rie:
Wim Muhlendyck set up his studio in 1931 in the Westerwäld pottery town of Höhr-Grenzhausen (home of Dümler & Breiden, Eckhardt & Engler, Marzi & Remi, Merkelbach, Sgrafo Modern, Steuler, Wick-Werke and Rudi Stahl, as well as of a Ceramic University), where he produced works which interpreted the local tradition; combining it, at times, with other traditions; all in a contemporary spirit.
Hailed as the reviver of the Westerwäld tradition, his work draws from traditional forms, glazes and decoration, but rises over the level of 'pastiche', and reveals an openness toowards a broad range of historical styles:
|Elmar and Elke Kubicek, Three vases. Stoneware. 1960s.|
As a result of serial production, quality could vary from piece to piece.
As a rule, however, their work achieved and sustained integrity. The vase below, by Rudi Stahl, achieves a simplicity of form, which turns the humble object-vase into an object which, in its Brancusi-like simplcity, achieves a zen-like quality:
|Rudi Stahl, Vase. Unglazed stoneware. 1960s.|
CRAFT IN INDUSTRY
German manufacturers proved that building craft into industry was nor only possible, but also economically viable, and could achieve the 'vitality' that Read regarded as essential.
* (Art and Industry, 2nd 1944, p. 160).
FORM VERSUS GLAZE: THE SUPPREMACY OF GLAZES
Many factories, like Marei Keramik, achieved a new vitality by placing a stronger emphasis on glazes (over form).
Lava glazes had the effect of attenuating the machine look and geometric perfection of slip cast and moulded vases, and emancipated glazes from their subservient role as surface decoration.
This is evident in the vase below (previously attributed to Roth, but now attributed to Marei, following the recent discovery of trade catalogs), in which the glaze takes over the form and, at the same time, enhances and energises it:
Marei, Vase. Form 4302. Stoneware, decorated with thick red lava.
The effect of different glazes on the same vase (form) is illustrated in the exhibition.
This is a rare achievement, however, for, more often than not, batch production introduced a degree of uniformity; the consequence of standardisation and repetition which, at times, reduced the creative scope of the glazier to a minimum.
For the discriminating collector, the challenge is to find a 'good' instance of a glaze, among the hundreds or thousands that were applied over several batches.
Calling on first class ceramic designers Kurt Tschörner (form) and Otto Gerhaz (glaze) [below left], the firm Ruscha produced some iconic vases (313, 315, 333) in which form and glaze achieved a remarkable, harmonious equilibrium.
By contrast, artist turned ceramicist Schaffenacker (below, right) deconstructed conventional vase forms, in a deliberate move to redefine THE VASE AS SCULPTURE:
|Left: Ruscha. Vase 333. Design: Kurt Tschorner (form), 1958, Otto Gerhaz (glaze). Right: Schaffenacker. Vase V13|
|Two amonite vases: Schaffenacker (left). Tirschenreuth (Germany)|
In the two examples (above) by Schaffenacker (left) and Tirschenreuth (right) the technology of slip casting echoes the tectonic 'press-moulding' of the subject.
Bridging the gap between ceramics and sculpture, Heiner Balzar designed his 'OBJEKTE' series of twelve vases for Steuler, in 1985. Hand-thrown, reshaped, then moulded and cast in an open edition, these sculptural works were available to a wide public. Working in a way not too dissimilar to the way bronze sculptures and fine art prints provide multiples of original works, it did so more democratically, however; for each piece was not signed and numbered, but simply carried a mini booklet showing a photo of the artist at work and the twelve pieces in the series: invitation to collect:
The juxtaposition (below) of a hand-thrown ‘studio’ pot by Rudi Stahl with a slip cast krug vase by Ruscha Keramik highlights their distinctive and discrete aesthetic materialities; demonstrating that ‘studio’ and ‘industrial’ modes of production can both generate ceramic works of quality; if the design is good, if the manufacturing processes and if the technologies are skilfully and appropriately applied; capitalizing on their aesthetic potential.
The austere, introspective quality of Rudi Stahl's stoneware vase, on the left (1950s-60s) — inspired by the traditional undecorated stonewares from the Westerwälder region (where Stahl set up his studio, in the ceramic centre of Höhr-Grenzhausen), and, perhaps also, by traditional Japanese stoneware — its earthy matt glaze and the concentric lines left by the hand, as it shaped the clay on the potter’s wheel, contrast with the lighter, streamlined body of vase ‘315’, with its flowing/flamboyant handle, its striking red craquelé glaze, with black matt occlusions, which break the uniformity of its shiny surface.
Neither vase is demeaned by the 'confrontation'. Both hold their own aesthetic ground.
Whether we prefer one over the other does not reflect on the vases themselves, but is a matter of personal taste, and should be acknowledged as such.
The same can be illustrated with the following juxtapposition:
CONVERSATION 10: Studio Versus Factory
Capitalizing, as Ruscha did with their cult vases 313, 315 and 333, and most other manufacturers did with their own designs [Marei, Jopeko, Fohr, etc.], Scheurich issued the same forms, decorated with different glazes, as with vase '244-17':
The conversation below, demonstrates the capacity of glazes to transfigure FORM:
CONVERSATION 11: Beyond Tautology: The Transmutation of Form
The capacity of glazes to transform form is evident in the following juxtapposition of two identical vases by Gerda Keuckeroth from c. 1962-64.
As German factories explored and capitalized on the expressive power of glazes — beyond mere decoration — into artistic or pictorial expression, a number of studio potters converged in their experiments with glazes. Albert Kiessling developed a range of 'snakeskin' glazes which became one of his signatures, and makes his work stand out by their three dimensionality:
These glazes (some reminscent of Japanese glazes and, more recently, of those used by Jean Pointu, and members of the School of Carries, in France, during the early 20th century) set standards in Germany, and inspired Kirstin Unterstab to emulate them to great effect:
LUSTRE and CRYSTALLINE GLAZES
After leaving the family studio, where he had been working with his brother Rudi, Wendelin Stahl
set up his own studio in Burg Coraidelstein, with his partner Else Harney, where they developed bright glazes with crystallizations, for which he achieved international recognition:
Due to their commercial availability, blue crystalline glazes (developed, among others, by Grès de Pierrefonds in France, from around 1910) occur in the work of several potters: Kierstin Unterstab and Walter Gebauer (who also published a textbook about the subject in 1985).
Throughout the 60s and 70s, experiments with glazes continued in Germany, with the adoption of lava glazes by several manufacturers.
It is important to note that the most spectacular lava glazes were produced in factories, not in studios; by manufacturers who had the technologies, man power and the financial resources to invest in research and experimentation. Responding to the exhortation of critics, in trade magazines, to produce more modern wares. It is ironical that a writer who exorted German companies to take more risks, later complained that some manufacturers had gone too far!
[personal communication from Ralf Schumann]. The author may have had the lava glazes produced by Marei, in mind (till recently attributed to Roth Keramik).
CONVERSATION 12: The input of Craft: in Studio and Factory
Left: Rudi Stahl, Vase. Hand-thrown partly glazed stoneware. Right: Marei .Vase. Moulded stoneware. Decor 'Capri', 1967, as shown on decor pictures from the Marei company'. Courtesy Ralf Schumann and Volker Hornbostel.
Since, in order to be economically viable, ceramic works had to be produced in series, control over technical processes was essential. The challenge, however, was to prevent the works from looking too formulaic, standardized or banal. The fact that a substantial proportion do, suggests that it may not have been perceived — by manufacturers and by customers — as a problem, and was accepted as a necessary consequence of batch production and keeping prices low.
Today, the task, for the discerning collector, is to find pieces that stands out — as the result of skilfull glaze application, a happy firing accident, glaze run, etc. — among the mass of formulaic products that came off the production line.
Thus, discriminating collectors find themselves in a similar position to that of the Japanese tea masters who, from the seventeenth century, went around looking for tea bowls, in country potteries, searching for a glazing and firing accident that made a bowl special, distinctive…
However, given the industrial mode of production, a good design and the application of craft skills at all stages of the making process — especially glazing — could, and did produce works of artistic quality, even with standardised forms and glazes (the aleatoric nature of the glazing process meant that no two pots could ever be the same).
The firm Marei, who are now making flower pots, are exemplary of how a fine balance between innovative designs, good craftsmanship and creative use of technology could produce ceramic works of lasting decorative interest; alongside other banal products manufactured for purely commercial reasons and to satisfy all tastes.
Following recent attribution of works previously believed to have been manufactured by Roth Keramik, it would seem that, at least from 1967 (with their 'Capri' glaze), Marei produced an outstanding (perhaps the best) range of lava glazes. For this reason they feature prominently in the exhibition — alongside Roth, Fohr, Jopeko, Scheurich, and others — with over fourteen vases.
ROTH AND MAREI COMPARED
The distinctive approach of Roth Keramik could be summarized as follows:
Take a vase of simple, timeless form (preferably with a handle), apply a coat of bright, colorful glaze (red, orange, yellow); next, apply a layer of clear shiny glaze; then a thick matt black volcanic glaze to the top of the vase (allowing it to run on the neck but not lower than the shoulder), to emphasize the contrast between bright, shiny color and thick matt lava textures.
Comparing different versions of the same design one can evaluate the skills of the glazier and the glaze chemist involved in the production of these items.
A batch was also produced in which a clear glaze was applied on top of the black volcanic glaze, giving it a more unified (but also more uniform, standardised) feel.
This latter recipee was also used by Jopeko, Fohr and other manufacturers.
Take a vase of simple timeless form (preferably with a handle), apply a coat of blue or deep red glossy glaze then spread wide black strips of matt volvanic glace (Franz Kline style)
or first apply a thick, dark slip, cover it with a thick bright, colorful glaze (blue/white, orange, orange-red) that will run on the body of the vase covering most or all of it; absorbing some of the black layer and letting show parts of it as clusters.
Given the complex, aleatoric nature of the processes involved, it was more difficult to control them, and required the input of a skilfull glazier to implement the desired effects.
It is, perhaps, worth remembering that:
1. These ceramics were made as decorative objects for the home, not as existential or grand aesthetic personal statements.
2. They were and remain outward rather than inward looking, and should be treated accordingly, as decorative (design) objects for the home.
3. They had to be produced in large numbers, simplifying manufacturing processes to reduce the cost of production to make it economically viable. This involved making compromises.
For comparison, the work of studio potters Rudy Stahl, the Kubicek and Gerhard Liebenthron illustrate how, during the 50s, 60s and 70s, the local stoneware tradition was re-interpreted in a modern vein, in parallel with the industrially-produced 'Fat Lava'.
The enigmatic firm Hoy Keramik, whose hand-thrown stoneware vessels were decorated with the brightest blue, yellow, red, green, orange and brown glazes — and became known for the cult matt, blue glaze, inspired by Yves Klein's 'International Klein Blue' — achieved a synthesis between rural and antiquarian (archaeological) forms; combining them simply and to great effect with bright, urban industrial glazes which gave them an air of modernity. Their success, aesthetically, rested in having simplified production processes without sacrificing quality, and in having harmoniously integrated craft processes (they retained hand-throwing for all their pieces) with the requirements of serial production.
MEANWHILE IN VALLAURIS
During the late 40s, the small pottery town of Vallauris, in the South of France — which had, for centuries, produced cooking pots [see section 4: Vallauris) and other domestic wares in 'terres vernissées' — underwent a renaissance. Thanks to the presence of artists like Picasso, Miro, Cocteau, Magnelli, Pignon, etc., potters and pottery enthusiasts came to Vallauris from different parts of France, to reinvent themselves as 'artist-potters'.
CONVERSATION 13: Vallauris: Between Tradition & Innovation
Left: Vase, La Poterie Provençale, Biot. Right: vase. Unidentified maker.
The modern interpretation of a traditional vase in 'terre vernissée' (above left), by La Poterie Provençale in Biot, and the neo-baroque sculptural vase decorated with a motif of the sun (right) highlight the Mediterranean spirit in which this revival took place — between tradition and the figurative modernity embodied by the works of Cocteau, Léger, Miro and Picasso.
One significant contribution of Vallauris to postwar popular ceramics was the development of the 'écume de mer' glaze; a thick, rich, textured blue and white glaze named after the froth on the waves as they break and die onto the sand.
It is not clear who invented it; and it is not a subject discussed in books about Vallauris.
Louis Giraud produced thick dark lava glazes perhaps as early as the 50s, but the origin of 'écume de mer', used by Faddy (who identified his work with a sticky label) on hand-thrown and on slip-cast vases, remains a mystery.
It is found on conventional vases (classical urn), as well as on vases which, like Schaffenacker's vases, in Germany (albeit in a very different spirit), redefined the vase as sculpture:
Modelled and carved like a sculpture, this vase was actually cast from a mould, in an unidentified factory. Made and retailed as giftware, it made modernity widely affordable across the country through gift shops. Although the sculptural form ('forme libre') and the spectacular glaze stand out, the workshop remains anonymous. The workshop produced a number of variation on this theme. Five are included in the exhibition.
Unfortunately, current writers on Vallauris ceramics tend to dismiss these works as kitsch, in a rather elitist way, and have so far avoided researching their makers.
CONVERSATION 14: From 'Écume de Mer' to 'Fat Lava''
Other experiments with lava glazes, different from 'écume de mer' type glazes, led potters like Marius Giuge and other makers of 'fantaisie' wares to produce stark black and white volcanic glazes, which they applied to vases, bowls and candle holders, to spectacular effects:
Note the difference between the classical form of the Vallauris vase (expression of its Mediterranean legacy?) and the geometric form and more restrained flow of the glaze on the Jopeko vase. In the form of the vases and, perhaps, in the lava flow itself, two cultural traditions manifest themselves: Mediterranean Classicism and Bauhaus Modernism.
This candelabra from Marius Giuge's atelier seems straight out of a surrealist Cocteau movie. It was made for the general public, and sold in his showroom alongside coffee sets, dishes, jugs and vases, as can be seen on this postcard of the Giuge shop in Vallauris:
CONVERSATION 15: Bay Keramik. Le Vaucour
In the German vase below left, by Bay Keramik, 'fat lava' was sparingly used as a slip, calligraphically applied, onto a vase of conventional form, decorated with smooth, matt black and red glazes.
By contrast the vase by Le Vaucour (Vallauris) combines a geometric composition with red and black triangles (reminiscent of Russian Suprematism or Constructivism) on a textured lava glaze showing black crater onto a white grumolous glaze, with a clear glaze finish. Whereas the Bay vase is traditional in form, the Vallauris vase is irregular and fluid in its form ('free form') and evocative of a a more fluid, dynamic making process: